how to setup Integration Services on SQL 2005 cluster

We have SQL Server 2005 cluster setup, active/passive, 2 nodes, on Windows
2003. If I try to add a maintenance task using sql management studio on my
pc I get error: "apply to target server failed for job". If I try it using
management studio while on the active node of the cluster I get error:
"failed to create the task, exception from hresult: 0xC0010014
Microsoft.SqlServer.DTSRuntimeWrap".
I installed Integration Services on both nodes and followed instructions in
document ms345193 to configure IS on the cluster, but I must have something
wrong.
Any ideas what I should look at to get this to work? Thanks!
Denise,
this you follow this http://msdn2.microsoft.com/en-us/library/ms345193.aspx
?
HTH,
_Edwin.
"denise" <denise@.discussions.microsoft.com> wrote in message
news:92A9C846-69CA-4B46-87FE-75E567904FD9@.microsoft.com...
> We have SQL Server 2005 cluster setup, active/passive, 2 nodes, on Windows
> 2003. If I try to add a maintenance task using sql management studio on
my
> pc I get error: "apply to target server failed for job". If I try it
using
> management studio while on the active node of the cluster I get error:
> "failed to create the task, exception from hresult: 0xC0010014
> Microsoft.SqlServer.DTSRuntimeWrap".
> I installed Integration Services on both nodes and followed instructions
in
> document ms345193 to configure IS on the cluster, but I must have
something
> wrong.
> Any ideas what I should look at to get this to work? Thanks!
|||Yes, I was a little unsure of which drives to use as the dependencies (should
all shared drives be there, we have several, I just picked one, E drive), and
the registry set up, in step 9, I just put what is in the document, then in
step 14 I put the shared drive where I copied the MsDtsSrvr.ini.xml file (I
used E drive).
Could someone talk me through what should be set in each step? Thanks!
"Edwin vMierlo" wrote:

> Denise,
> this you follow this http://msdn2.microsoft.com/en-us/library/ms345193.aspx
> ?
> HTH,
> _Edwin.
>
>
> "denise" <denise@.discussions.microsoft.com> wrote in message
> news:92A9C846-69CA-4B46-87FE-75E567904FD9@.microsoft.com...
> my
> using
> in
> something
>
>
|||
> Yes, I was a little unsure of which drives to use as the dependencies
(should
> all shared drives be there, we have several, I just picked one, E drive),
and
If the E drive is the only drive you use for the packages and file, than
that is OK, however if not sure you can add all drives.

> the registry set up, in step 9, I just put what is in the document, then
in
In step 9 you fill in the registry location (not the disk);
"SOFTWARE\Microsoft\MSDTS\ServiceConfigFile"

> step 14 I put the shared drive where I copied the MsDtsSrvr.ini.xml file
(I
> used E drive).
In step 14 you put in the fulname and directory path in the registry,
Example
E:\dir\subdir\MsDtsSrvr.ini.xml

> Could someone talk me through what should be set in each step? Thanks!
HTH,
_Edwin.
|||I have all this set up correctly. Any other ideas of what could be wrong?
Would it be affected by the MSDTS configuration set up on the cluster?
Thanks so much for your help.
"Edwin vMierlo" wrote:

> (should
> and
> If the E drive is the only drive you use for the packages and file, than
> that is OK, however if not sure you can add all drives.
> in
> In step 9 you fill in the registry location (not the disk);
> "SOFTWARE\Microsoft\MSDTS\ServiceConfigFile"
> (I
> In step 14 you put in the fulname and directory path in the registry,
> Example
> E:\dir\subdir\MsDtsSrvr.ini.xml
>
> HTH,
> _Edwin.
>
>

How to setup integration services on a cluster

Does anyone know how to install SQL 2005 integration services on a cluster machine?

I have an a-a cluster machine. Both nodes are using SQL 2005 naming instance. During the SQL installation, I did include integration services option as one of my setup items. The setup process was running fine but I can’t connect to integration services via MS SQL Server management studio. I see below errors:

“Invalid server name "TESTServer\B123". SSIS service does not support multi-instance, use just server name instead of "server name\instance".

Looks like I must use default instance for 2005 integration services. I re-ran the setup program and added a default instance on the same cluster node. (On that node I have one default instance and one naming instance). Now I can connect to the default SQL Server but when I click on “stored packages”, I don’t see file system and MSDB. It shows nothing at all. Any idea how to make integration services running on a cluster machine?

Thanks

I had the same error when I tried to view an SSIS package on my server with 2 instances but I had no default instance, so my case was a little different than yours. The way I resolved my problem was by hard coding both instances into my XML configuration file. I did not have a cluster in this case but the principle should be the same, you'll just have to play around with it a little bit. You may also have to modify the XML file on both nodes of your cluster.

<ServerName>my-server-01\instance1</ServerName>
<ServerName>my-server-01\instance2</ServerName>

If you have a default instance and a named instance you might try something like this:

<ServerName>my-server-01</ServerName>
<ServerName>my-server-01\instance1</ServerName>

Microsoft SQL Server 2005 Integration Services (SSIS) includes a configuration file for configuring the Integration Services service.

By default, the file is located in the folder, Program Files\Microsoft SQL Server\90\DTS\Binn, and the file name is MsDtsSrvr.ini.xml.

http://msdn2.microsoft.com/en-us/library/ms137789.aspx

|||

Microsoft has a document published on how to install Integration Services on a cluster.

http://msdn2.microsoft.com/en-us/library/ms345193.aspx

|||

I have the same problem in that I have set up SSIS on the cluster using the microsoft instructions. The SSIS service starts and fails over between nodes just fine. The problem is that I cannot see the MSDB or File System under Stored Packages. I've double (tripple) checked the path to the XML in the registry, the registry path in the cluster service properties, and the XML itself. Everything seems in order.

Any ideas?

|||

I'm in exactly the same situation. Did anyone resolve this problem ?

tia

bryn64

|||Have smae problem. Resolution?

How to setup integration services on a cluster

Does anyone know how to install SQL 2005 integration services on a cluster machine?

I have an a-a cluster machine. Both nodes are using SQL 2005 naming instance. During the SQL installation, I did include integration services option as one of my setup items. The setup process was running fine but I can’t connect to integration services via MS SQL Server management studio. I see below errors:

“Invalid server name "TESTServer\B123". SSIS service does not support multi-instance, use just server name instead of "server name\instance".

Looks like I must use default instance for 2005 integration services. I re-ran the setup program and added a default instance on the same cluster node. (On that node I have one default instance and one naming instance). Now I can connect to the default SQL Server but when I click on “stored packages”, I don’t see file system and MSDB. It shows nothing at all. Any idea how to make integration services running on a cluster machine?

Thanks

I had the same error when I tried to view an SSIS package on my server with 2 instances but I had no default instance, so my case was a little different than yours. The way I resolved my problem was by hard coding both instances into my XML configuration file. I did not have a cluster in this case but the principle should be the same, you'll just have to play around with it a little bit. You may also have to modify the XML file on both nodes of your cluster.

<ServerName>my-server-01\instance1</ServerName>
<ServerName>my-server-01\instance2</ServerName>

If you have a default instance and a named instance you might try something like this:

<ServerName>my-server-01</ServerName>
<ServerName>my-server-01\instance1</ServerName>

Microsoft SQL Server 2005 Integration Services (SSIS) includes a configuration file for configuring the Integration Services service.

By default, the file is located in the folder, Program Files\Microsoft SQL Server\90\DTS\Binn, and the file name is MsDtsSrvr.ini.xml.

http://msdn2.microsoft.com/en-us/library/ms137789.aspx

|||

Microsoft has a document published on how to install Integration Services on a cluster.

http://msdn2.microsoft.com/en-us/library/ms345193.aspx

|||

I have the same problem in that I have set up SSIS on the cluster using the microsoft instructions. The SSIS service starts and fails over between nodes just fine. The problem is that I cannot see the MSDB or File System under Stored Packages. I've double (tripple) checked the path to the XML in the registry, the registry path in the cluster service properties, and the XML itself. Everything seems in order.

Any ideas?

|||

I'm in exactly the same situation. Did anyone resolve this problem ?

tia

bryn64

|||Have smae problem. Resolution?sql

How to setup integration services on a cluster

Does anyone know how to install SQL 2005 integration services on a cluster machine?

I have an a-a cluster machine. Both nodes are using SQL 2005 naming instance. During the SQL installation, I did include integration services option as one of my setup items. The setup process was running fine but I can’t connect to integration services via MS SQL Server management studio. I see below errors:

“Invalid server name "TESTServer\B123". SSIS service does not support multi-instance, use just server name instead of "server name\instance".

Looks like I must use default instance for 2005 integration services. I re-ran the setup program and added a default instance on the same cluster node. (On that node I have one default instance and one naming instance). Now I can connect to the default SQL Server but when I click on “stored packages”, I don’t see file system and MSDB. It shows nothing at all. Any idea how to make integration services running on a cluster machine?

Thanks

I had the same error when I tried to view an SSIS package on my server with 2 instances but I had no default instance, so my case was a little different than yours. The way I resolved my problem was by hard coding both instances into my XML configuration file. I did not have a cluster in this case but the principle should be the same, you'll just have to play around with it a little bit. You may also have to modify the XML file on both nodes of your cluster.

<ServerName>my-server-01\instance1</ServerName>
<ServerName>my-server-01\instance2</ServerName>

If you have a default instance and a named instance you might try something like this:

<ServerName>my-server-01</ServerName>
<ServerName>my-server-01\instance1</ServerName>

Microsoft SQL Server 2005 Integration Services (SSIS) includes a configuration file for configuring the Integration Services service.

By default, the file is located in the folder, Program Files\Microsoft SQL Server\90\DTS\Binn, and the file name is MsDtsSrvr.ini.xml.

http://msdn2.microsoft.com/en-us/library/ms137789.aspx

|||

Microsoft has a document published on how to install Integration Services on a cluster.

http://msdn2.microsoft.com/en-us/library/ms345193.aspx

|||

I have the same problem in that I have set up SSIS on the cluster using the microsoft instructions. The SSIS service starts and fails over between nodes just fine. The problem is that I cannot see the MSDB or File System under Stored Packages. I've double (tripple) checked the path to the XML in the registry, the registry path in the cluster service properties, and the XML itself. Everything seems in order.

Any ideas?

|||

I'm in exactly the same situation. Did anyone resolve this problem ?

tia

bryn64

|||Have smae problem. Resolution?

how to Set variable value in sub package?

hi !

how to set variable value for sub package inside another package?

some thing like this:

xp_cmdshell 'dtexec /f \"D:\\SSISProject\\Integration Services Project1\\ArchiveMainMultiTables.dtsx\" /Set \package.Variables[User::ArchivePackageName].Properties[Value];\"ArchiveTicketLog\" /Set \package.Variables[User::ArchiveFileType].Properties[Value];\"text\" /Set \package.Variables[User::connectst].Properties[Value];\"Data/tSource=SE413695\AASQL2005;Initial/tCatalog=TestDB;Provider=SQLNCLI.1;Integrated/tSecurity=SSPI;\[ConnectionString]'

Main Package = ArchiveMainMultiTables.dtsx

sub packge = ArchiveTicketLog. when i try to execute the sub pacakge it thorughs up error saying the connection string in not set. i am setting in the parent connection string of the main package. when i execute through the pacakge itself it works fine but when i execute through the Sql command line it fails.

is there some thing to to "/Set [package name]\Package.Connections[ConnectStringArchiveTicket].Properties[Value];

please help

thanks

jas

Have you looked at parent package configurations?

Kirk Haselden
Author "SQL Server Integration Services"

|||

Some links here that may help as well:

Accessing variables in a parent package
(http://blogs.conchango.com/jamiethomson/archive/2005/09/01/2096.aspx)

Passing variables between packages
(http://blogs.conchango.com/jamiethomson/archive/2005/03/17/1151.aspx)

-Jamie

|||thanks

How To Set Multiple ReadOnlyVariables in Script Component in Integration Services 2005

Hello!

I'ave got a problem of setting more than one Variable in ReadOnlyVariables Property of ScriptComponent...I provide comma separated list of names ( As described in the help ) byt VS Studio Editor can not be opoened claiming that there is no a variablle with such a name...Looks like it doesn't treat the list as a collection of names...

Please help.

Vladimir

Make sure there are no spaces in the list.

Var1,Var2,Var3

This will not work:

Var1, Var2, Var3

Also note that variable names are case sensitive.|||Triple-check your spelling and the scope your variables are defined in. I got the error just this morning and it was a spelling problem.
|||

Thanks for your response...

I verified the spelling got rid of spaces...but result is the same

It is interesting thing.. I have only two variables: One is set on a package level and another is on the Data Flow Task level...

When I set one of them in ReadonlyVariables and another in ReadandWriteVariables it allows me to open VS for Applications. If I move both to the same location ( ReadonLy or ReadAnd Write with comma separation and no spaces ) it issues the message I described...

I tried specifying the namespaces for the variables, but with no Luck...

Not usre what to do...

Any ideas will be greately appreciated...

Thanks,

Vladimir

|||What version of SSIS are you using?

RTM? SP1? SP2?